BetaFPV F722 35A AIO Flight Controller 2-6S 26x26
About BETAFPV F722 2-6S 35A AIO Flight Controller:
The BETAFPV F722 2-6S 35A AIO flight controller is a reliable all in one FPV solution designed for advanced FPV flight. This 25.5x25.5mm AIO features an F722 chip and comes with BLHELI_S ESC firmware for enhanced performance and speed. It's equipped with a 6-pin connector for DJI Digital VTX, allowing for a plug & play setup that minimizes soldering and streamlines the installation process.
The BETAFPV F722 2-6S 35A AIO flight controller is a relThis BETAFPV 35A AIO is not just compact, it's also built to handle the demands of high-performance FPV flying. Whether you're into racing or freestyle, the BETAFPV 35A AIO Flight Controller delivers the stability and smoothness needed for precise control.
Features:
● Compared with F4 AIO 35A FC, F722 FC's firmware is upgraded from F411 to F722, providing a better performance capability and higher calculation speed, which brings pilots a more stable and smoother flight.
● F722 AIO 35A FC has specially added a 6-pin connector for DJI Digital VTX, just plug & play, less solder work needed, perfect for the pilots who enjoy the DJI Digital VTX system.
● 6 full UARTs are available on this board. With plenty of UARTS, Pilots could have more options for external parts like VTX, GPS, Receiver, and other components.
● It can handle 35A continuous current(40A burst), totally supports the 2-6S lipo battery, brings the drone a stronger flight performance.
● With the 6S battery and this F722 35A AIO toothpick FC, the drone will break through the limit of the power of the toothpick drone, exploring more possibilities in 4-5'' drones.
Specifications:
● Model: Flight Controller
● OSD: Built-in BetaFlight OSD (OSD chip: AT7456E)
● Firmware version: betaflight_4.2.x_BETAFPVF722
● Support programmable LED like WS2812 etc
● Six-Axis: MPU6000 (SPI connection)
● Mounting hole size: 26mm * 26mm
● Item: F722 35A AIO FC(BLHeli_S)
● CPU: STM32F722RET6
● Built-in current sensor
● Weight: 7.89g
● Model: ESC
● Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/Flysky Receiver/DSMX Receiver/TBS Crossfire Receiver (requires external connection)
● Signal support: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
● Recommended motors: 14XX series, 15XX series, 16XX series, 18XX series, 20XX series
● Indicators: 2 indicators: receiver indicator (green)/Flight control power indicator (red)
● Connecter: 80mm 14AWG silicone cable with XT60
● Capacitance: CS|5*10*13mm|470μF|35V
● ESC firmware: BLHELI_S
● Input voltage: 2S-6S Lipo
● Continuous current: 35A
● Peak current: 40A
Product recommendation:
● MEPS 3046 FPV propellers
Package included:
● 1* BETAFPV F722 2-6S 35A AIO Flight Controller
● Upgraded Firmware.
● DJI Digital VTX Connector.
● Offers 6 full UARTs.
● High Current Handling.
● Enhanced Power for Toothpick Drones.
