drone building

Introduction: Welcome to a detailed guide on building an FPV drone, focusing on the assembly of the Sector 5 drone using the HGLRC F760 stack and MEPS Space Motors. This guide aims to provide insights and steps for enthusiasts looking to embark on their own FPV drone build, emphasizing the importance of the right tools, preparation, and meticulous assembly for optimal performance. Introduction: Focus on building a Sector 5 FPV drone using the HGLRC F760 stack and MEPS Space Motors. Tools Needed: TS100 soldering iron, 3S battery, flux, solder, magnifying glass. ESC and Motor Preparation: Tin ESCs, solder to MEPS motors, ensure bottom stack is prepared. Flight Controller Assembly: Assemble with correct orientation, check board direction. Soldering Motors and Securing Wires: Solder motor wires to ESCs, secure with cloth tape, test with smoke stopper. VTX and Camera Setup: Install Walksnail Avatar system, ensure correct camera orientation, test with FPV goggles. Field Testing: Test all systems in the field, check GPS, beta flight settings, and battery. What you need： Freestyle Recommended: Racing Recommended: Here are the products shown in the video: Video Overview Welcome, everyone! Today, we're spending some time on the workbench with my HGLRC F760 stack. I've just soldered…