SZ60A 6S 4IN1 ESC & F7 Flight Controller Stack

About F7 Flight Controller:

Meet the MEPS SPACE F7 Flight Controller, a full-sized 30×30 drone flight controller designed for analog builds and powered by the STM32F722 microcontroller. Boasting the ubiquitous AT7456E chip for OSD overlay generation, this F7 flight controller is a reliable choice for your FPV racing drone.

Built for ease and efficiency, the MEPS SPACE F7 features well-sized solder pads and a sensible layout, making it a breeze to assemble. One standout feature is the introduction of the ability to assign a transmitter switch to control the VTx power regulator, offering added flexibility in your drone setup.

If you're in search of the best F7 flight controller or the best quadcopter flight controller, the MEPS SPACE F7 is a solid option, providing seemingly reliable VTx power switching as an additional feature. Consider this flight controller, especially if you plan on pairing it with MEPS motors – you can conveniently order them together for a seamless drone-building experience.

Elevate your FPV experience with the MEPS SPACE F7 – setting the standard for drone flight controllers, offering reliability and advanced features for your analog builds.

Features:

● Application: 30.5*30.5mm mounting holes.

● Lower Latency: Smoother operating, faster calculation, and sensitive response with STM32 F7 MCU and BMI270 gyro sensor.

● Less Heat Generation: VTX switch function and better thermal performance, reduce heat generation and interference.

● Rigorous Layout: Clear layout with easy-to-read labels for each port, minimizing wiring difficulties and electrical interference.

● Multi-Peripheral Friendly: With 5V/2A BEC outputs for different peripherals such as GPS, LED strip, buzzer, etc.

● 16MB Black Box: Store tens of minutes of flight data for professionals' tuning and troubleshooting needs.

Specification:

● Model: MEPS F7 Flight Controller

● Color: Black

● Input Voltage: 3-6S Lipo

● Processor: STM32F722

● IMU(Gyro): BMI270

● BEC: 5V 2A 

● OSD: AT7456E

● Black Box: 16MB

● Dimension: 37*37*6.5MM

● Mounting Holes: 30.5*30.5mm/Φ4mm

● Weight: 7.2g

Product Recommendation:

● MEPS 60A FPV ESC

● MEPS 2207 racing motor

● MEPS 2306 freestyle motor

Interface Definition Figure

Connection Diagram

Parameter Data

About 60A FPV Drone ESC:

Unlock unparalleled performance with the MEPS 60A FPV Drone ESC 4 in 1 – recognized as the best 4 in 1 ESC in the market. Equipped with the fastest MCU fully supported by BLHELI32, this drone ESC supports higher protocols, delivering a faster response for an unmatched flight experience. It stands out as the best 6s ESC, providing optimal power for high-performance drones.

Designed for excellence, the MEPS 60A features an upgraded heat sink and industrial-grade PCB, significantly enhancing heat dissipation capacity. With full access to all useful flight data, it ensures a reliable and efficient flight experience. Compatible with most mainstream FPV frames, this drone ESC 4 in 1 is the top choice for discerning FPV enthusiasts.

Choose the MEPS 60A for the best drone ESC, offering cutting-edge technology, superior heat dissipation, and compatibility with mainstream frames. Elevate your drone's performance with the best 6s ESC on the market.

Features:

● Application: 30.5*30.5mm mounting holes.

● High Current Load Capacity: With a current load capacity of up to 60A, our FPV drone ESC ensures you enjoy the flights with unparalleled ease and satisfaction whether you're performing acrobatic maneuvers or racing at high speeds.

● Enhanced Heat Dissipation: Features an upgraded heat sink and industrial-grade PCB that significantly improves the heat dissipation capacity, ensuring the FPV drone's efficiency remains optimal even during demanding conditions. 

● Compatible Mounting Holes: With 30.5*30.5mm mounting holes, it's compatible with most mainstream FPV frames, providing pilots with greater flexibility and ease of installation. 

● Telemetry Data Return: Offers full access to all the useful flight data, and enables pilots to monitor and adjust flights for optimal performance, making it easier to fine-tune your drone's performance and maximize your flight experience. 

● BLHeliSuite32: Supports higher protocols, providing faster response and increased reliability. 

Specification:

● Model: MEPS 60A FPV ESC

● Color: Black

● Input Voltage: 3-6S

● Continuous Current: 60A

● Peark Current: 65A

● Firmware: BLHeli 32

● Telemetry: Support

● Mounting Holes: 30.5*30.5mm/Φ4mm

● Dimension: 45.4*43.8*8mm

● Weight: 19g

Product Recommendation:

● MEPS F7 flight controller / MEPS F7 HD flight controller

● MEPS 2207 racing motor

● MEPS 2306 freestyle motor

Parameter Data

Package Included

● 1pc* MEPS FPV 60A ESC

● 1pc* MEPS FPV F7 Flight Controller

● 1pc*MEPS Hat

● 2pcs* Battery Straps

● 1pc* MEPS Sticker